Industrial plastering unit 60-litre

Agrekom Industrial Plastering Set is a mobile, fully pneumatic spraying system for applying a wide range of high-viscosity construction materials. The unit is easy to reposition and clean, and it is designed so that a single operator can manage the entire spraying process, helping to reduce labour and operating costs on site.

Unlike pumping machines, this system is 100% pneumatic, with no mechanical pump and therefore fewer wear parts. That means a competitive purchase price, reduced servicing requirements, and a practical setup that can spray many materials by selecting the appropriate spray gun, nozzle and pressure settings.

The AGREKOM system can significantly reduce operator effort and speed up application compared to manual methods.

Certified 60-litre pressure tank

At the heart of the system is a certified 60-litre pressure tank, engineered to feed dense materials smoothly to the spray gun.

Spray guns

AGT-40 Industrial Plaster Spray Gun (dense materials)

The AGT-40 is designed for denser and more demanding construction materials. It provides a strong, stable spray and good stream control when working with high-viscosity products.

AGM-40 Industrial Paint & Coatings Spray Gun

The AGM-40 is intended for less dense materials such as paints, primers and emulsion paints. These products can be applied without thinning.

Key Features and Device Solutions

1.Depressurisation
An integrated muffler allows quick, quiet depressurisation of the tank after finishing work.

2.Quick access and 100% leak-tight seal
The integrated gasket in the tank lid guarantees a fully leak-tight seal and safe operation. No tools are needed to open it — you can remove the lid quickly and comfortably, even with one hand.
 
3.Precise Pressure Control
Independent pressure adjustment for the spray gun (the regulator’s right knob) and for the tank (the left knob) allows you to fine-tune settings for a wide range of materials. The pressure gauges, fitted with rubber collars, are impact-resistant, and a specially designed quick coupling enables pressure-free, fast, and convenient connection of the air hose.
 
4.Full Material Utilisation
The use of a conical bottom allows complete use of the material inside the tank. Even dense materials flow freely from the tank into the material hose.
 
5.Easy Maintenance
A specially designed ball valve at the bottom outlet can be easily disassembled, speeding up servicing and cleaning after work.
 
6.Stability and Mobility
Rubber wheels help absorb shocks and reduce noise when moving over uneven ground. Two front swivel wheels improve manoeuvrability and include brakes to prevent unintended movement. Larger rear wheels further improve stability and make repositioning easier.