Air compressor 50-litre oil-lubricated V-twin 3HP (110V)

Need plenty of air, fast? The TORPEDA TP-V50-110 pairs a V-twin pump with a 2.2 kW direct-drive motor to deliver up to 390 L/min – a high output for a 50-litre site compressor. It runs on 110 V site power through a standard UK site transformer and is built to keep up with the most air-hungry tools on the job.

Maximum air output

The two cylinders are set in a V and driven directly by the motor at 2850 rpm. With no belt in between, the motor's power goes straight into compressed air, giving up to 390 L/min at a maximum working pressure of 8 bar. That's enough to keep plastering units running smoothly and to power demanding air tools without long waits for pressure.

Quick refill, steady pressure

High output means the 50-litre tank fills quickly and recovers fast between bursts of heavy use. A finned delivery pipe cools the air on its way to the tank, and the automatic pressure switch starts and stops the motor to hold pressure where you need it.

Compact V-twin design

With no belt or pulleys to tension or replace, the TP-V50-110 has a compact, low-maintenance build. Large wheels and a tubular handle let you roll it across rough ground, and rubber feet keep it steady while it works.

Complete kit, ready to go

It comes fitted with a pressure regulator, tank and outlet gauges, a filter with water separator and a quick coupler outlet. A 20 m air hose with quick couplers and 0.6 L of compressor oil are included, so you can get to work as soon as it arrives.